| register number |
U.0.05 Bent formwork, formwork for curved structures, other formwork elements |
| data processing short term |
RUNDSCHALUNG |
standard
equipment |
In the following positions, the MOV is not only determined by the unit, but also by weight or by area as a piece-by-piece listing does not make sense due to the multitude of elements.
This method permits fixing the MOV for each part, as the weight and the area of each individual part are indicated in the manufacturers' lists of articles.
In the case of formwork elements supplied with shuttering skin, the latter is written off together with the frame.
The maintenance costs and the costs for replacement of the shuttering skin - except for damage caused by violence - are included in the repair rates.
Large-area formwork systems for the assembly of bent formwork with adjustable radii, including glued multi-layer boards with film coating, for a concrete pressure < 60 kN/m².
Partially as supplement to U.0.00.
All steel parts galvanised.
Group 3 + 4: 3001 - 4999 Bent formwork with continuously adjustable radii of pre-assembled standard elements with wooden support. Elements ready for use with exact curvature grading and glued wooden board 21 mm with film coating for a concrete pressure < 60 kN/m².
Radii below 3.50 m - classification in acc. with original value.
Group 5 + 6: 5001 - 5999 Bent formwork with continuously adjustable radii of pre-assembled standard elements with galvanized steel sections.
Group 7: 7001 - 7999 Formwork accessories for bent formwork
Values per kg.
|
| register of construction equipment 1991 |
New |
| |
| description: |
|
| characteristic |
area (m²) |
|
| years of usage: |
* |
| months of rate action |
* |
| monthly ratio for depreciation and interest rate |
* |
| monthly ratio for costs of repair |
* |
|
