Home | | | proposed addition | Imprint | contact

register number U.0.05 Bent formwork, formwork for curved structures, other formwork elements
data processing short term RUNDSCHALUNG
standard
equipment		 In the following positions, the MOV is not only determined by the unit, but also by weight or by area as a piece-by-piece listing does not make sense due to the multitude of elements.
This method permits fixing the MOV for each part, as the weight and the area of each individual part are indicated in the manufacturers' lists of articles.
In the case of formwork elements supplied with shuttering skin, the latter is written off together with the frame.
The maintenance costs and the costs for replacement of the shuttering skin - except for damage caused by violence - are included in the repair rates.
Large-area formwork systems for the assembly of bent formwork with adjustable radii, including glued multi-layer boards with film coating, for a concrete pressure < 60 kN/m².
Partially as supplement to U.0.00.
All steel parts galvanised.
Group 3 + 4: 3001 - 4999 Bent formwork with continuously adjustable radii of pre-assembled standard elements with wooden support. Elements ready for use with exact curvature grading and glued wooden board 21 mm with film coating for a concrete pressure < 60 kN/m².
Radii below 3.50 m - classification in acc. with original value.
Group 5 + 6: 5001 - 5999 Bent formwork with continuously adjustable radii of pre-assembled standard elements with galvanized steel sections.

Group 7: 7001 - 7999 Formwork accessories for bent formwork
Values per kg.
register of construction equipment 1991 New
characteristic area (m²)

years of usage *
months of rate action *
monthly ratio for depreciation and interest rate *
monthly ratio for costs of repair *


accessory   number area
in m²		 height
in m		 designation
 weight
kg/m²		 average replacement value
Euro		 monthly
costs of repair
in Euro		 monthly depreciation
and interest rate
from Euro		 monthly depreciation
and interest rate
to Euro		 register of construction equipment 1991  
additional equipment   U.0.05.3001 1 < 0,70 Außenelement Holz H < 0,70m 113 * * * *
additional equipment   U.0.05.3071 1 0,71 - 1,20 Außenelement Holz H = 0,71 - 1,20m 83 * * * *
additional equipment   U.0.05.3121 1 1,21 - 2,40 Außenelement Holz H = 1,21 - 2,40m 81 * * * *
additional equipment   U.0.05.3241 1 2,41 - 3,00 Außenelement Holz H = 2,41 - 3,00m 80 * * * *
additional equipment   U.0.05.3301 1 3,01 - 3,60 Außenelement Holz H = 3,01 - 3,60m 80 * * * *
additional equipment   U.0.05.3361 1 3,61 - 4,80 Außenelement Holz H = 3,61 - 4,80m 80 * * * *
additional equipment   U.0.05.4001 1 < 0,70 Innenelement Holz < 0,70m 116 * * * *
additional equipment   U.0.05.4071 1 0,71 - 1,20 Innenelement Holz H = 0,71 - 1,20m 85 * * * *
additional equipment   U.0.05.4121 1 1,21 - 2,40 Innenelement Holz H = 1,21 - 2,40m 82 * * * *
additional equipment   U.0.05.4241 1 2,41 - 3,00 Innenelement Holz H = 2,41 - 3,00m 81 * * * *
additional equipment   U.0.05.4301 1 3,01 - 3,60 Innenelement Holz H = 3,01 - 3,60m 81 * * * *
additional equipment   U.0.05.4361 1 3,61 - 4,80 Innenelement Holz H = 3,61 - 4,80m 81 * * * *
additional equipment   U.0.05.5001 1 < 1,50 Außenelement St H < 1,50m 51 * * * *
additional equipment   U.0.05.5151 1 1,51 - 2,00 Außenelement St H = 1,51 - 2,00m 53 * * * *
additional equipment   U.0.05.5201 1 2,01 - 3,00 Außenelement St H = 2,01 - 3,00m 49 * * * *
additional equipment   U.0.05.6001 1 < 1,50 Innenelement St H < 1,50m 52 * * * *
additional equipment   U.0.05.6151 1 1,51 - 2,00 Innenelement St H = 1,51 - 2,00m 54 * * * *
additional equipment   U.0.05.6201 1 2,01 - 3,00 Innenelement St H = 2,01 - 3,00m 50 * * * *
additional equipment   U.0.05.7001 Aufstocklasche 1 * * * *
additional equipment   U.0.05.7101 Kranöse ( systemkompatibel ) 1 * * * *
additional equipment   U.0.05.7201 Verbindungsteile 1 * * * *
additional equipment   U.0.05.7901 Sonstiges Zubehör St 1 * * * *

additional equipment = additional equipment, additional devices = additional devices