| register number |
U.0.01 Pillar formwork (column formwork), rectangular or round |
| data processing short term |
SAEULENSCHALUNG |
standard
equipment |
In the following positions, the MOV is not only determined by the unit, but also by weight or by area as a piece-by-piece listing does not make sense due to the multitude of elements.
This method permits fixing the MOV for each part, as the weight and the area of each individual part are indicated in the manufacturers' lists of articles.
In the case of formwork elements supplied with shuttering skin, the latter is written off together with the frame.
The maintenance costs and the costs for replacement of the shuttering skin - except for damage caused by violence - are included in the repair rates.
Pillar forms are used for the construction of pillars (columns) with rectangular or round cross-section.
Partially as a supplement for U.0.00.
All steel parts galvanized.
Group 4: 4001 - 4999 pillar forms for square, rectangular or polygonal cross-sections are made of frame elements without formwork lining or of large-surface formwork building block systems.
Frames - Classification according to original value.
Group 5: 5001 - 5999 pillar forms for rectangular cross-sections made of precast standard elements with formwork lining.
Group 6: 6001 - 6999 pillar forms for round cross-sections made of precast elements with formwork lining made of steel of multi-layer boards. Steel forms can only be used for one diameter and consist of two halves, varnished on the outside, waxed on the inside. Aluminium forms can be used for variable diameters.
Classification according to original value.
Group 7: 7001 - 7999 accessories for pillar forms
values / kg.
|
| register of construction equipment 1991 |
9639 |
| |
| description: |
|
| characteristic |
surface (m²) |
|
| years of usage: |
* |
| months of rate action |
* |
| monthly ratio for depreciation and interest rate |
* |
| monthly ratio for costs of repair |
* |
|
