| register number |
U.0.29 module ceiling sheeting |
| data processing short term |
MODUL DECKENSCHALUNG |
standard
equipment |
In the following positions, the MOV is not only determined by the unit, but also by weight or by area as a piece-by-piece listing does not make sense due to the multitude of elements.
This method permits fixing the MOV for each part, as the weight and the area of each individual part are indicated in the manufacturers' lists of articles.
In the case of formwork elements supplied with shuttering skin, the latter is written off together with the frame.
The maintenance costs and the costs for replacement of the shuttering skin - except for damage caused by violence - are included in the repair rates.
Ceiling formwork of light metal panels consisting of:
aluminium frames with a height of < 14 cm. Supported by middle, edge, fall heads and panel beams.
With formwork skin ca. 10 mm multi-layer boards with film coating.
Group 1: 1001 - 1999 aluminium frame elements.
Parameter: area (m²), weight (kg/m²), MOV (€/m²).
Group 2: 2001 - 2999 supports for alu ceiling formwork ca. 16 cm high to which the frame elements are attached.
Parameter: weight (kg), length (m), MOV (€/kg).
Group 3: 3001 - 3999 accessories for alu ceiling formwork.
Parameter: weight (kg), MOV (€/kg).
|
| register of construction equipment 1991 |
|
| |
| description: |
|
| characteristic |
area (m²) |
|
| years of usage: |
* |
| months of rate action |
* |
| monthly ratio for depreciation and interest rate |
* |
| monthly ratio for costs of repair |
* |
|
