Home | | | proposed addition | Imprint | contact
A - Material processing equipment
B - Equipment for the production, transport and distribution of concrete, mortar and rendering mixes
C - Lifting gear
D - Equipment for earthmoving and soil compaction
E - Road construction machinery
F - Railway track construction equipment
G - Floating equipment
H - Tunnel and mining construction equipment
J - Pile drivers and extractors, soil injection equipment
K - Drilling equipment, diaphragm wall equipment
L - Equipment for pipe jacking and pipeline construction
M - Equipment and plants for decontamination and environment protection
P - Transport vehicles
Q - Air compressors, pneumatic tools
R - Equipment for power generation, transformation and distribution
S - Hydraulic cylinders and hydraulic units
T - Centrifugal and piston pumps, pipelines
U - Formwork and scaffolds
U.0 - Formwork
U.1 - Supports and scaffolds
U.2 - Scaffolds
U.2.0 - Scaffolds consisting of individual tubes
U.2.1 - Ready-made scaffolds
U.2.10 - Plug-in frame scaffolds, steel
U.2.11 - Aluminium system scaffolds
U.2.12 - Transfer scaffolds
U.2.13 - Falsework
U.2.14 - Other types of ready-made scaffolds
U.2.2 - Suspensuion scaffolds
U.3 - Miscellaneous equipment
U.4 - Canal sheeting
W - Workshop machines and equipment
X - Construction site accomodations, containers
Y - Equipment for surveying, laboratory, office, communication and monitoring
register number U.2.11 Aluminium system scaffolds
data processing short term RAHMENGERUEST ALU
standard
equipment		 Note:
In the following positions, the median original value is not only determined on a piece-by-piece, but also on a weight- and area-related basis, as the piece-by-piece evaluation does not make sense due to the large number of pieces.
This method allows the determination of the median original value for each part, as the commodity catalogues of the manufacturers specifiy the weight and area of each individual part. Independent of the method chosen for the MOV evaluation, a piece-by-piece management based on the catalogues is still possible.
Basic equipment:
System scaffolds made of aluminium inserting frames with horizontal and vertical frames, scaffold widths < 0.80 m, floor heigt approx. 2.00 m.
Group 1: 1001-1999 vertical frame width < 0.80m.
consisting of two posts connected at the top with a cross-beam, open at the bottom
Values per kg.
Note:
Couplers for pipe connections – see U.2.01.
Ladders – see U.2.04.
Stairs – see U.2.06.
Accessible floors – see U.2.04.
register of construction equipment 1991 9609