Home | | | proposed addition | Imprint | contact
A - Material processing equipment
B - Equipment for the production, transport and distribution of concrete, mortar and rendering mixes
C - Lifting gear
D - Equipment for earthmoving and soil compaction
E - Road construction machinery
E.0 - Equipment for the production of hot asphalt
E.1 - Equipment for cold asphalt mixing
E.2 - Equipment for the production and storage of hydrocarbon-based binders (BITUMEN)
E.3 - Black-top machinery and equipment for hot, bituminous mixes
E.4 - Road surfacing machines for cold bituminous mixes
E.5 - Equipment for surface treatment with binders and grit
E.6 - Concrete paving plants and equipment
E.6.0 - Self-propelled concrete feeders
E.6.1 - Self-propelled concrete spreaders
E.6.2 - Concrete finishers
E.6.20 - Concrete pavement finisher, 2 crawler units
E.6.21 - Concrete pavement finisher, 3 crawler units, rigid frame
E.6.22 - Concrete pavement finisher, 3 articulated crawler units, slewing arm
E.6.23 - Concrete pavement finisher, 4 crawler units, rigid
E.6.24 - Concrete pavement finisher, 4 articulated crawler units, slewing arm
E.6.3 - Vibrating smoothing beams / vibrating beams
E.6.4 - Concrete finishers, extrusion system
E.6.5 - Equipment for preparing and laying of plastic mats
E.6.6 - Miscellaneous equipment for concrete finishers
E.6.7 - Miscellaneous equipment for concrete pavings
E.7 - Road milling machines and in-situ asphalt-recycling equipment
E.8 - In-situ soil stabilization equipment
E.9 - Miscellaneous road-building equipment
F - Railway track construction equipment
G - Floating equipment
H - Tunnel and mining construction equipment
J - Pile drivers and extractors, soil injection equipment
K - Drilling equipment, diaphragm wall equipment
L - Equipment for pipe jacking and pipeline construction
M - Equipment and plants for decontamination and environment protection
P - Transport vehicles
Q - Air compressors, pneumatic tools
R - Equipment for power generation, transformation and distribution
S - Hydraulic cylinders and hydraulic units
T - Centrifugal and piston pumps, pipelines
U - Formwork and scaffolds
W - Workshop machines and equipment
X - Construction site accomodations, containers
Y - Equipment for surveying, laboratory, office, communication and monitoring
register number E.6.21 Concrete pavement finisher, 3 crawler units, rigid frame
data processing short term GLEITSCHALFERT 3 RAU
standard
equipment		 Standard equipment in general:

The paving plants consists of several individual units (e.g. distributor, paver, dowel placer, finisher, tents) and are rail- or track-mounted. Slip-form finishers are equipped with crawler tracks and combine the working functions of spreading, compacting and finishing in a single machine equipped with a levelling system. The working functions of dowel or bolt placing may also be located directly in the slip-form finisher.
Basic machine with 3 steerable crawler unit in rigid frames for the construction of concrete pavements, concrete lanes or monolithic concrete profiles inside and outside of the chassis. Working functions: spreading, compacting, profiling, if required, screeding and post-screeding by finisher. The placing level and the steering is controlled by a prestressed wire follower resp. by means of reference heights with a computer-controlled electro-hydraulic levelling system, with equipment for monolithic shapes, The construction of concrete areas is possible with the appropriate equipment.
Without: steel forms
Monolithic steel forms see E.6.60.
register of construction equipment 1991
wearing part conveyor belt, consistometer bottles, shoving strip, screed strip , conveyor belt, vibrator bottles, strike-off screed, finishing screed