register number |
U.1.00 Steel/aluminium ceiling prop (site prop) |
data processing short term |
DECKENSTUETZE ST AL |
standard equipment |
Ceiling prop, steel or aluminium, height adjustment with cotter pins, fine addjustment with free or hidden thread, with head- and base-plate.
Ceiling prop, made of steel, aluminium or combination of steel internal pipe and aluminium external pipe.
Group 0: 0100 - 0999 ceiling prop, of steel acc. to old standard DIN 4424.
Group 2: 2120 - 2999 ceiling prop, of aluminium acc. to old standard DIN 4424.
Group 4: 4001 - 4999 ceiling prop, with invariable bearing capacity of 20 kN. independent of exctraction length as per EN 1065.
4000 - 4499 steel.
4500 - 4999 aluminium or steel/aluminium combination.
Group 5: 5001 - 5999 ceiling prop, with invariable bearing capacity of 30 kN independent of exctraction length as per EN 1065.
Props made of steel, aluminium or steel, aluminium or combination of internal steel pipe and external aluminium section.
5000- 5499 steel.
5500 - 5999 aluminium or steel/aluminium combination.
Group 6: 6001 - 6999 ceiling prop with 40 kN bearing capacity 40 kN.
6000 - 6499 steel.
6500 - 6999 aluminium or steel/aluminium combination.
Group 7: 7001 - 7999 ceiling prop with invariable bearing capacity of 60 kN. independent of exctraction length as per EN 1065.
7000 - 7499 steel.
7500 - 7999 aluminium or combination of internal steel pipe and external aluminium section.
Group 8: 8001 - 8999 accessories for ceiling props: head-plates and base-plates.
Note:
Diagonal stiffening frames between two ceiling props for the realization of load towers see U.1.06.
|
register of construction equipment 1991 |
9660 |
characteristic |
extended length (m) |
|
years of usage |
* |
months of rate action |
* |
monthly ratio for depreciation and interest rate |
* |
monthly ratio for costs of repair |
* |
|