| register number |
C.2.20 Crawler crane, diesel-mechanical drive, lattice boom |
| data processing short term |
RAUPENKRAN DIMECH GA |
standard
equipment |
C.2.20-C.2.25:
The max. payload moment (tm) serves as technical parameter.
The max.load moment is based on the following parameters: max. bearing capacity at 6.0 m cantilever during crane operation with basic jib, max. counterweight , broadest track, min. 75 % of the tip-load and 360° slewing range
C.2.20-C.2.25:
Technical parameter: max. payload moment (tm).
The max. nominal load moment is determined on the basis of the max. lifting capacity at a cantilever of 6.0 m, crane operation with basic boom, max. counterweight, widest track, at least 75 % of the moment of tilt and 360° slewing range.
Classification according to new value.
|
| register of construction equipment 1991 |
New |
| wearing part |
ropes except holding ropes, automatic rope unwinder, slide blocks
,
ropes excluding stay cables, automatic rope unwinder, sliding blocks
|
| characteristic |
nominal load moment (tm) |
| classification |
classification due to replacement value |
|
| years of usage |
* |
| months of rate action |
* |
| monthly ratio for depreciation and interest rate |
* |
| monthly ratio for costs of repair |
* |
|