register number B.4.50 Concrete mixing plant with pan mixer, low-height design
data processing short term MISCHANLAGE BETON N
standard
equipment
DIN 459-1 defines the nominal capacity as the technical parameter. Nominal capacity = volume of the fresh concrete produced in one working cycle and in compacted condition (compaction rate 1.45). If the mixer size is specified together with dry fill quantity, the following rule applies:
Dry fill quantity = nominal capacity x 1.5
Concrete discharge height up to 2.2 m for concrete buckets, concrete pump or front dump truck, fully automatic batching of water and cement, aggregates by means of hand-operated or pneumatically operated gate valves. Weigher suited for calibration.

With: proportioning wall 3-5fold, open control stand, hand-operated, additives pump, vibrator, batch counter and ammeter for consistency measurements

Without: box walls, silos, cement screws and scrapers
register of construction equipment 1991 1142
wearing part feeder rope, wear plates of mixer arms and scraper, blades or mixing screws, trough lining including lateral sheets, feeder belts, wear plates of material chutes and slides, elevator chain and chain sprockets
characteristic capacity of mixing vessel (l)

years of usage *
months of rate action *
monthly ratio for depreciation and interest rate *
monthly ratio for costs of repair *


accessory   number capacity of mixing vessel
in l
theoretical mixer throughput
in m³/h
motor rating
in kW
weight
kg
average replacement value
Euro
monthly
costs of repair
in Euro
monthly depreciation
and interest rate
from Euro
monthly depreciation
and interest rate
to Euro
register of construction equipment 1991  
additional equipment   additional devices B.4.50.0375 375 18 17 5600 * * * * 1142
additional equipment   additional devices B.4.50.0500 500 24-26 21-25 5800 * * * * 1142
additional equipment   additional devices B.4.50.0750 750 36 26-34 6000 * * * * 1142

additional equipment = additional equipment, additional devices = additional devices